Yes, we have meticulously engineered a comprehensive waterproof architecture to safeguard the internal electronics. You can submerge the device in water for cleaning or flush water directly through the internal channel, rest assured that the electronic components are fully protected from water exposure during routine washes.
Just keep one detail in mind: to protect the internal motor and circuitry, please do not aim the water stream directly at the power switch, and towel dry promptly after washing.
At Salorein, we believe that true immersion shouldn't be interrupted by the anxiety of maintenance. We engineered Sabrina not just as a vessel of desire, but as a masterpiece of functional design.
You shouldn't have to worry about the internal electronics, we’ve already built the fortress that protects them.
The First Use
When unboxing your doll for the first time, you may notice a subtle material scent or a light dusting of white powder on the surface.
Why did I receive a doll with an odor?
A doll made of medical-grade TPE material may develop a slight odor after being enclosed in plastic protective film for an extended period during transportation. The Salorein doll has undergone quality certification, so please feel assured to use it.
Why did I receive a doll with white powder on the doll's skin surface?
① Dolls made of TPE material experience a significant release of oil after the final production process, known as "demolding." To maintain smooth skin, workers apply a generous amount of renewal powder to the dolls before they leave the factory.
② During the long-distance transportation process, the oil and powder, in the sealed state, may blend, resulting in sporadic localized white powder appearing on the doll's skin surface.
The remedy is simple: a gentle wash and 24 hours in a well-ventilated space. You'll find that the initial scent naturally fades, leaving behind pure, lifelike skin that warms naturally to your touch.
What to do before using a sex doll?
Setting the scene: how to prepare for your ultimate intimate experience
Initial Charge
Always fully charge the device before your first session to ensure uninterrupted optimal performance.
Lubrication
Apply an ample amount of only water-based lubricant to the internal channel for a smooth experience.
Power & Modes
Long-press (3s) to power on, then short-press it again to cycle through the 5 vibration and suction modes.
Enjoy & Safety
Find your preferred position and enjoy. Discontinue use immediately if any discomfort occurs.
How do I clean my doll after using it?
We believe the post-experience glow shouldn't be ruined by a complicated cleanup. Thanks to her IPX6 water-resistant design, rinsing your Salorein is worry-free. To maintain that incredibly soft TPE feel and safely care for the internal components, simply follow this quick routine.
1. The Wash
Always ensure your device is turned off before cleaning. You can clean the device using warm water (under 50°C/122°F) and a mild, unscented antibacterial soap. We have meticulously engineered a comprehensive waterproof architecture to safeguard the internal electronics. You can safely submerge the device in water for cleaning, and flush water directly through the internal channel.
Just keep one detail in mind: please do not aim the water stream directly at the power switch, and towel dry promptly after washing.
For the deepest, most refreshing clean, we highly recommend the Spherical Channel Cleaner of Salorein Care Kit. This ergonomic tool is specifically designed to quickly and safely rinse away any personal fluids and lubricants, keeping her internal structure pristine, fresh, and ready for your next session.
2. Dry & Protect
Pat dry the water on the doll's skin surface. with a lint-free microfiber towel. Immediately after washing, thoroughly dry the area around the control switch. It is critical to prevent water droplets from entering the air vents.
For the internal channel, Insert a drying stick, microfiber towel, or moisture-absorbing sponge into the channel. Press on the abdomen and buttocks of the sex doll to help drain moisture from the tunnel. Do not leave these inside for more than 30 minutes to prevent bacterial growth or material damage.
For a 100% dry finish, use a cold-air USB blower or an aquarium air pump to ensure no residual moisture remains deep inside.
3. Restore the Finish
Once the doll is completely dry, you can apply a small amount of mineral oil or baby oil to the doll's skin to help delay oxidation and maintain a soft, lifelike texture (do not oil too frequently—only when needed, depending on the doll’s condition). Gently massage the oil into the surface and allow it to absorb for about 3 hours. Afterward, use a microfiber towel to pat dry any residual oil.
If you notice any hair, lint, or fine fibers on the skin, use wide packing tape to gently dab and lift them away. This is an effective way to clear the surface without damaging the TPE.
Finally, to eliminate any remaining tackiness, apply renewing powder (cornstarch or talc-free baby powder) to the exterior surface. This restores the soft, silky feel. Never apply oil or powder inside the internal channel.
4. Enjoy & Safety
Once maintenance is complete, return your Salorein to its original, custom-contoured packaging.
This specialized environment is engineered to support the torso’s weight in its optimal alignment, preventing long-term deformation or "flat spots."
The custom casing also acts as a sterile shield against dust and environmental contaminants, maximizing the lifespan of your doll.
IMPORTANT:
NO HEAT: Never use a hot hair dryer. Heat will melt and permanently ruin the TPE.
NO SILICONE LUBE: Only use high-quality water-based lubricants. Silicone degrades the material.
NO LUBE NEAR THE SWITCH: Keep all lubricants away from the control panel. Fluids can seep through the vents and damage the internal motor.
How to save your sex doll?
Preserving the perfection: keeping her pristine for next time
Stay Dry
Ensure all internal channels and the skin surface are completely dry before storage.
Material Safety
Avoid contact with PVC or silicone materials to prevent chemical reactions.
Neutral Position
Store in a flat, lying position with limbs kept straight to maintain shape.
Custom Packaging
Use Salorein's Customized packaging for optimal dust protection and privacy.
Cleaning FAQ
Add short description for this section.
Is my doll waterproof?
Why do dolls get stained, and how to handle stains?
Our dolls are made from soft and durable TPE material. However, TPE’s high porosity makes it prone to absorbing dirt, especially the dyes from dark-colored clothing. To keep your doll clean and in good condition, we recommend avoiding dark clothing whenever possible.
If dark clothing must be worn, wash it several times before dressing the doll, and avoid contact with sharp objects to protect the doll’s skin. Regular cleaning and maintenance will help keep the doll in optimal condition.
How to handle stains on the doll?
Mild staining: Apply a small amount of baby oil or mineral oil to the stained area.
Moderate Staining: Gently wipe 1-2 times with TPE Cleaner, or repeat as needed. If stain persists, apply more cleaner and let sit for 1-2 hours before wiping again.
Severe Staining: Use Discoloration Cream, apply with a cotton swab, wait 8-24 hours, then wipe clean with a cotton pad.
What should I do if my doll’s skin starts peeling?
Skin peeling on dolls is usually caused by improper maintenance or excessive cleaning. Regularly applying oil to your doll helps slow down skin oxidation and aging.
Generally, applying oil after each cleaning can effectively protect the doll’s skin. The frequency of oil application should be adjusted based on usage, and we recommend using baby oil or mineral oil.
If peeling occurs, follow these steps to care for your doll:
- Thoroughly dry the doll’s tunnels and skin, ensuring there is no residual moisture.
- Once the doll is completely dry, apply a small amount of baby oil or mineral oil to the skin multiple times in thin layers.
- Allow the skin to fully absorb the oil in a well-ventilated area.
- Apply Renewal Powder or baby powder to keep the doll’s skin smooth and shiny.
What should I do if my doll develops mold?
Good cleaning habits are the best way to prevent mold growth. We recommend cleaning the doll’s tunnel immediately after use. If the tunnel remains damp for an extended period, mold and bacteria can thrive, putting the doll in an unhealthy state. A moldy doll is not suitable for use. Avoid leaving drying sticks in the tunnel for too long.
If mold is found in the tunnel, stop using the doll immediately to ensure hygiene and safety. Even if the mold is removed, invisible spores may remain. Therefore, always ensure the tunnel is thoroughly dried during routine cleaning. Moisture and a closed environment can easily lead to mold regrowth.